Nia kharisma

17 September 2017

Canon CanoScan LiDE 500F Review

Filed under: Printers — Tags: — Nia Kharisma @ 01:07

The Canon CanoScan LiDE 500F Driver under advantages in small plans. At 1.3 by 10.9 by 15.5 inches and 4 pounds, it’s little enough to certify as mobile. And although the absence of an ADF limits its usefulness for general office scanning, the packed OmniPage SE 2.0 for OCR and the capability to check directly to a PDF data are both extremely welcome attributes.

Arrangement varies from many USB 2.0 scanners in two noteworthy methods. Initially, there’s no power cord. Rather, the scanner obtains its power from the USB port. Second, you can use the built-in stand to set the scanner up vertically to make sure that it uses much less space on your desk. When it remains in the upright placement, you can open the cover and also go down an image or page into the V formed by the scanner platen and cover, a technique that usually works just as well as putting it on the platen with the scanner existing flat.

You cannot check film in the upright placement, however that’s very little of a loss. Just like the majority of economical flatbeds with film scanning, this is best described as a convenience attribute– meaning that it functions, however do not expect much from it. In particular, it’s limited to strips of film. Because the scanner uses a call picture sensing unit (CIS), the deepness of area is as well restricted to check a placed slide.

The CanoScan LiDE 500F Driver declares a 2,400 optical by 4,800 mechanical resolution. Check top quality was less crisp than the numbers suggest, however, with a minor loss of information compared with both the initial as well as other scanners at any kind of offered resolution. The scans also had the tendency to lose detail in bright areas. However, they are easily adequate to let you check pictures to send out as e-mail or reprint for buddies. You’ll likewise discover a beneficial color bring back attribute for faded images. Yet in testing, the dirt- and scratch-removal attribute had little result.

Rate is within an affordable array. Prescans took a reasonably lengthy 11 to 30 secs, compared with 8 to 15 secs for the current Editors’ Option Canon CanoScan 9950F. Yet scanning 4-by-6 photos took just around 16 to 18 secs at 300 pixels per inch (ppi) compared to 13 to 18 seconds for the 9950F. Count the LiDE 500 as a good value, specifically if you require a scanner you can sometimes bring with you. Source : supportcanon

Powered by WordPress